U-Line Origins Refrigerator Code E11: EE Memory Error

What E11 means

On U-Line Echelon and Origins refrigerators such as the 2275DWRR, E11 reports an EE memory error. The EE memory is where the control stores its settings, and the control has detected a problem reading or keeping them. You see E11 on the display. Because the control relies on that memory to run the cabinet, the code points to the control electronics, not a door or a filter.

Common causes of E11

The EE memory on the control cannot be read correctly
The stored settings are corrupted
The control board needs attention

✓ One safe check you can try

1. Switch the refrigerator off at its power switch or unplug it for one minute. 2. Plug it back in and let the display start. 3. Check that the outlet is working and the cord is seated. 4. Do not remove any panel. 5. If E11 comes back, call us.

! Why to stop there

A memory error sits inside the control, which we do not recommend opening
Resetting the power again and again does not repair stored data
We state the price before work begins, and our repair is covered for 30 days

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator & Drawers codes

E5U-Line Echelon 2000 Code E5: Thermistor 1 reading 10 F above set point E5U-Line Origins 1000 Code E5: Temperature 10 degrees above set point for 6 hours E6U-Line Echelon 2000 Code E6: Thermistor 1 reading 10 F below set point E6U-Line Origins 1000 Code E6: Temperature 10 degrees below set point for 6 hours E7U-Line Echelon 2000 Code E7: Thermistor 2 open or shorted E8U-Line Echelon 2000 Code E8: Thermistor 3 open or shorted E9U-Line Echelon 2000 Code E9: Thermistor 4 (condenser) open or shorted ER (alternating with SP)U-Line Echelon 2000 Message "ER alternating with SP": error summary display

E11E11 questions

What does E11 mean on my refrigerator?

E11 is an EE memory error. The control stores settings in this memory, and it cannot read or keep them correctly, so it shows E11 on the display.

Will unplugging the refrigerator fix E11?

A single power cycle is safe and worth trying. If E11 returns, the memory problem is still there, and the control needs our attention.

Is food safe while E11 shows?

Check the temperature with a separate thermometer. If the cabinet holds its temperature, you have time to book a visit. If it warms, move food to another cooler and call right away.