Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent U-Line specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 581-3724 Set Up a Visit
Model library · U-Line Refrigerator & Drawers

1175R

U-Line 1175R Origins Refrigerator Repair

U-Line refrigerator

Most common issues on this model

  1. Warm compartment from a thermistor or fan that has drifted out of range
  2. Origins control set to the wrong model, causing odd temperature behavior
  3. Worn door seal letting room air into the cabinet
  4. Condenser coil caked with dust after years of use
  5. Door switch not turning on the interior light

The 1175R is a refrigerator from the Origins 1000 line, most often tucked under a counter in a kitchen, a family room or a bar, with a trim kick plate that hides the condenser airflow slot. It has been in service a good while, and age shows first at the door and the coil.

Dust builds on the coil more slowly than owners expect, but after many years it adds up, and the compressor then runs long and warms the cabinet. A seal that has lost its shape does similar harm, so the two together cause most of the slow warming we see.

Our order is simple: clean the airflow slot and coil, test the seal, read the thermistor against a probe thermometer, and check the Origins control for the right model setting. Anything we find is quoted in writing before we proceed, and we stand behind the repair with a 30-day warranty.

Key features

  • Refrigerator in the Origins 1000 line
  • Origins control with its own service-mode model select
  • Undercounter or built-in placement
  • Error-code control for sensor and circuit alerts
→Codes

Error codes this model can show

1175R1175R questions
My 1175R is running all the time. Is the compressor failing?

More often the condenser is dirty or the door seal has failed, so the cabinet never reaches its set point. We clean the coil and test the seal before we consider anything involving the compressor.

What is the model select setting?

The Origins control stores which cabinet it belongs to so it uses the correct temperature profile. After a board change we confirm that this setting matches the 1175R.

Can I check the seal myself?

Close a strip of paper in the door at several points. If it slides out easily anywhere, the gasket is not sealing there, and we can replace it or adjust the hinges.

Book a visit

Book repair for your 1175R

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Set Up a Visit