U-Line OCR115 Crescent Ice Repair
Crescent ice comes from a harvest cycle: the mold freezes, then warms briefly to release the cubes. That rhythm is sensitive to the air around the machine, which is why the OCR115 behaves differently in July than in October. Heat stretches the freeze, and cold stretches the harvest.
Patios add one more rule: the water line must be emptied before a freeze. A line that holds water through a cold night swells and cracks, and the leak only appears when the spring thaw refills it. We check the valve body and tubing for cracks and confirm the drain-down steps are in place.
Near the coast, hinges and fasteners take salt from the air, so we also inspect and replace any that have started to seize. Pricing is given in writing first.
High ambient heat slows the freeze and shortens the time ice forms on the mold. We clean the condenser, check the fan, and confirm the water level so the cycle returns to normal.
Close the water supply and drain the inlet line and reservoir before temperatures fall below freezing. We can perform the drain-down and check the valve for cracks before the machine is used again.
We repair what we find: loose or corroded hinge screws, a stiff hinge, or a gasket pulled out of place. We clean the area, replace worn hardware, and tell you the price before we begin.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
