U-Line HNB115 Nugget Icemaker Repair
Nugget ice has its own following, and the HNB115 is the 15-inch machine that makes it. It is a companion build to the HNP115 and is also sold as UHNB115. It goes under a counter in a built-in install, in a kitchen, bar or family room.
An auger turns inside a freezing cylinder and pushes nuggets up into the bin, which puts the load on the drive rather than on a harvest cycle. Over years, bearings and gears wear and the drive growls. A restricted water inlet starves the cylinder, and nuggets thin out.
When ice sits in the bin it can bridge, leaving a hollow under a crust. We test the auger, water supply and bin sensor, and break up bridging. A written price comes before work, and a 30-day warranty follows.
Yes, the auger drive is the source of growling. We inspect the bearings and gear, replace the worn part, and run a full production cycle to confirm the sound is gone.
The water inlet is restricted. We clean or replace the valve and filter, restore full flow to the freezing cylinder, and watch the bin to confirm the nuggets build at a normal rate.
Bridging forms when ice sits unused. We clear the lump, check that the bin drains, and suggest drawing ice regularly so it stays loose and ready to scoop.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
