Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent U-Line specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 581-3724 Set Up a Visit
Error code · Ice Machine

U-Line 3000 Series Message “Time to Clean”: Water Circulation Needs Cleaning

On U-Line 3000 Series clear ice makers such as the 3018CLR and 3045CLR, the message Time to Clean appears when the water circulation system requires cleaning. It is a reminder, not an alarm. The machine keeps…

Low risk · DIY check OK
Set Up a Visit(713) 581-3724
Code
Time to Clean
Appliance
Ice Machine
Brand
U-Line
Warranty
30-day workmanship

What Time to Clean means

On U-Line 3000 Series clear ice makers such as the 3018CLR and 3045CLR, the message Time to Clean appears when the water circulation system requires cleaning. It is a reminder, not an alarm. The machine keeps its place in the cycle, and you see the words on the display until a cleaning is done and the reminder is reset.

Common causes of Time to Clean

  • The cleaning interval for the water circulation system has come up
  • Mineral buildup is collecting in the circulation path
  • The reminder has not been reset after a past cleaning
✓ One safe check you can try

1. Look at the ice bin and clear it of ice. 2. Follow the cleaning routine for the machine using a cleaner made for ice makers. 3. Rinse the system thoroughly afterward. 4. Discard the first batch of ice. 5. Call us if the message returns right after a cleaning.

! Why to stop there
  • Cleaning products used wrongly leave residue in your ice
  • A message that returns after cleaning points to something else in the water path
  • We quote in writing first, and our work has a 30-day warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Ice Machine codes

Ice / Off scrolling with SPU-Line Echelon 2000 Message "Ice / Off scrolling with SP": ice maker off mode CLU-Line Echelon 2000 Message "CL": self-cleaning cycle running CLR2060 one flashU-Line CLR2060 One flash: overflow protection circuit open CLR2060 two flashesU-Line CLR2060 Two flashes: open thermistor or too warm CLRCO2075 LED 2 flashingU-Line CLRCO2075 LED 2 flashing: open thermistor CLRCO2075 LED 3 flashingU-Line CLRCO2075 LED 3 flashing: drain pump blocked or overloaded E6U-Line Ice Machine Code E6 Reads Sensor 2 as Shorted E7U-Line Nugget Ice Machine Code E7: Third Sensor Shorted
Time to CleanTime to Clean questions
Is Time to Clean an error?

No. It is a maintenance message telling you the water circulation system requires cleaning. The ice maker is working, and the message is there so scale does not build up unnoticed.

Which models show this message?

The 3000 Series clear ice makers, including the 3018CLR and 3045CLR, show Time to Clean when the circulation system is due for cleaning.

What if the message comes back after I clean?

Then the reminder did not reset, or the water path still holds buildup. We can clean the system properly, reset the reminder, and confirm clear ice is forming again.

Book a visit

Still unsure about Time to Clean?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 581-3724
☎ Call the desk ▤ Set Up a Visit