Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent U-Line specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 581-3724 Set Up a Visit
Error code · Refrigerator & Drawers

U-Line Echelon 2000 Display “SP”: normal set-point readout

On U-Line Echelon 2000 refrigerators with the 2010 electronic control, such as the 2175RF and the 2275ZWC, SP is the normal set-point display, shown as SP 38 for example. It is not an error. If any…

Low risk · DIY check OK
Set Up a Visit(713) 581-3724
Code
SP
Appliance
Refrigerator & Drawers
Brand
U-Line
Warranty
30-day workmanship

What SP means

On U-Line Echelon 2000 refrigerators with the 2010 electronic control, such as the 2175RF and the 2275ZWC, SP is the normal set-point display, shown as SP 38 for example. It is not an error. If any other display shows instead, a diagnostic mode was entered by accident, and a key press, a power off and on, or unplugging the unit for 1 minute returns the normal view.

Common causes of SP

  • Normal operation showing the set point
  • A diagnostic mode entered by accidental key presses
✓ One safe check you can try

1. If the display reads SP and a number, nothing is wrong. 2. If you see another readout, press any key. 3. If it stays, switch the unit off and on again. 4. As a last step, unplug it for one minute and plug it back in. 5. Call us if the odd display returns.

! Why to stop there
  • SP is the correct display, so there is nothing to repair
  • Accidental modes clear with a restart
  • A repeat of the same display needs a keypad check
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Refrigerator & Drawers codes

E5U-Line Echelon 2000 Code E5: Thermistor 1 reading 10 F above set point E5U-Line Origins 1000 Code E5: Temperature 10 degrees above set point for 6 hours E6U-Line Echelon 2000 Code E6: Thermistor 1 reading 10 F below set point E6U-Line Origins 1000 Code E6: Temperature 10 degrees below set point for 6 hours E7U-Line Echelon 2000 Code E7: Thermistor 2 open or shorted E8U-Line Echelon 2000 Code E8: Thermistor 3 open or shorted E9U-Line Echelon 2000 Code E9: Thermistor 4 (condenser) open or shorted ER (alternating with SP)U-Line Echelon 2000 Message "ER alternating with SP": error summary display
SPSP questions
What does SP 38 mean?

SP is the set point, and 38 is the temperature in degrees Fahrenheit the cabinet aims for. It is the normal display on Echelon 2000 models with the 2010 control.

Why does the display show something else?

Pressing keys in a certain order enters a diagnostic mode. A key press, a power cycle or a one-minute unplug takes you back to SP.

When should I call you?

Call us if the display keeps leaving SP without anyone touching the keys, or if the cabinet temperature drifts from the set point. We give a written price before any work.

Book a visit

Still unsure about SP?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 581-3724
☎ Call the desk ▤ Set Up a Visit