U-Line BI1215 Built-In Icemaker Repair
Under a counter in a kitchen, bar or basement, the BI1215 turns out crescent ice in a harvest cycle: water freezes on an evaporator, warms briefly, and the cubes drop into the bin. The number belongs to the Origin line, and the controls reflect that earlier design.
The evaporator is where years of use show. Scale from the water supply coats it, and the cubes cling or come out small. We descale the surface, then look at the bin sensor, which shuts the machine off when the bin is full and can shut it off early when it is dirty.
Meltwater has to leave the bin through a drain, so we flush that path too. A clogged drain leaves water standing in the base. Written pricing comes before any work, and a 30-day warranty covers the repair.
The water supply is restricted or the evaporator is scaled. We check the inlet valve and screen, clean the surface, and run a cycle to confirm the crescents form fully.
The bin-full sensor is dirty or misaligned and reads the bin as full. We clean and test it, and replace it if it keeps ending the cycle with space in the bin.
It runs to a drain connection. If the drain is blocked, water stands in the base, so we flush the line, confirm the flow, and check the fall of the hose behind the cabinet.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
