Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent U-Line specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 581-3724 Set Up a Visit
Model library · U-Line Refrigerator & Drawers

3018RF

U-Line 3018RF Deli and Market Fridge-Freezer Repair

U-Line refrigerator

Most common issues on this model

  1. Deli or Market mode set incorrectly, so the cabinet holds the wrong temperature
  2. Freezer section warm when the convection fan slows
  3. Frost on the evaporator from a door seal that leaks
  4. Control reading that disagrees with a probe on the shelf
  5. Condenser grille blocked by dust

The 3018RF is a refrigerator and freezer from the 3000 Series, built for under-counter spaces where a compact combination is needed, such as a pantry, a bar or a small kitchen. Its two operating choices, Deli Mode at 36 F and Market Mode at 38 F, let the owner shape it to the food that goes inside.

The mode matters more than owners expect. A cabinet set for the wrong profile cools to the wrong point, and a reading that looks like a failed sensor may only be a mode change after a power outage. Behind the setting, a single convection fan serves both sections, so a slow fan affects the freezer first.

We confirm the mode, measure the shelves with a probe and test the fan and thermistor. Then we look at the evaporator for frost and clean the condenser. A written price comes first, and every repair comes with a 30-day workmanship warranty.

Key features

  • Refrigerator/freezer with 3.4 cu ft of refrigeration capacity
  • Deli Mode defaults to 36 F and Market Mode to 38 F
  • Single-zone convection cooling
  • Door options U-3018RFS-00 / -01 and U-3018RFOL-00 / -01
→Codes

Error codes this model can show

3018RF3018RF questions
What is the difference between Deli Mode and Market Mode?

Deli Mode defaults to 36 F and Market Mode to 38 F. We confirm which mode your 3018RF is in and whether the cabinet holds that temperature on a shelf probe.

Why did my cabinet warm after a power outage?

The mode can reset, so the cabinet may cool to a different target. We check the mode first, then test the sensors if readings still do not match.

Does the overlay model need different service?

Cooling work is the same. The panel adds weight to the hinges, so we also inspect door alignment and gasket contact, because a drooping panel is a common reason the seal leaks.

Book a visit

Book repair for your 3018RF

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Set Up a Visit