1115WC

Most common issues on this model

1. Cabinet temperature swinging because the thermistor reads out of range
2. Control set to the wrong model after a board swap, causing odd cycling
3. Gasket flattened by the weight of a narrow door
4. Condenser grille clogged, so the compressor runs without catching up
5. Interior light or display not responding

The 1115WC is a slim wine cabinet from the Origins 1000 line, designed for the narrow gaps in a kitchen run, a butler pantry or a bar where a standard wine cooler would not fit. It keeps a modest collection at cellar temperature, and an older unit like this needs steady, careful upkeep.

One quirk of the Origins control is that it must be told which model it belongs to. When a board has been replaced or reset, a wrong setting leaves the cabinet cooling to the wrong profile, and the owner sees swings that look like a failed compressor.

We verify the model setting in service mode, then read the thermistor against a probe, clean the condenser and inspect the gasket. A narrow door twists easily, so we check hinge fit as well. Pricing is given in writing before we order a part, and every repair carries a 30-day workmanship warranty.

Key features

• Slim Wine Captain in the Origins 1000 line
• Narrow footprint made for tight cabinet gaps
• Origins control with its own service-mode model select
• Wine cabinet cooling for undercounter or built-in placement